Page 1 of 1

warning: ultimate cobra commander fault

Posted: 17 Oct 2013 01:23
by eddy-arashikage
a heads up to any of you guys who may have bought an ultimate cobra commander. .. many have brought this figure and have encountered a stuck head... if you you attempt to move or remove his chromed head you will break it!

Gary of wojm fame told me of this and today I seen online that its a common problem I have just checked mine and I have one like it but after running my hot tap till its at its hottest and filling a cup I was able to remove the chromed head without snapping the neck off like so many people did.. I left it submerged in the cup of hot water and was able to remove its head without causing damage to the figure!!

Hopefully this proves helpful to you guys! Any questions just ask :cobracommander: :cobracommander:

Re: warning: ultimate cobra commander fault

Posted: 17 Oct 2013 01:27
by eddy-arashikage
as a further note inside the chromed head is excess glue which is where the problem no dobt lies after freeing the stuck heads I was able to put it back on and then I moved it around to make sure it stayed loose!! Again I hope this helps!!