Page 2 of 2

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 12:05
by SteveD
Well, I've got one of each spare - a Phones and Skip? But you'd have to go all Toy Story on them, as they are complete? Want me to break them so you can accept them?

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 12:46
by Chopper
SteveD wrote:Well, I've got one of each spare - a Phones and Skip? But you'd have to go all Toy Story on them, as they are complete? Want me to break them so you can accept them?
Nooooooooooooooooooooo. Sounds like a hostage situation. lol. I'd rather they stayed in one piece, thanks Steve. I've built a Z Sgt Major, Z Trooper variant, Z leftover bloke, SAS Officer, and being tormented by a Shad atm. The paint is out and he's becoming a Shad sniper... or maybe....

Here's a silly question. can a Z force Palitoy figure sit in the drivers seat of the ATC? cause the won't in an APC. :-(

:chopper:

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 12:57
by The Baron
They sure can. The ATC had a completely new interior for small-size footpegs.

See Step 2.

Image

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 13:14
by SteveD
I love that scan - ever such a well presented young man carrying his APC - possibly off to Grandmas house for tea, where he will sit and play quietly on the lounge floor. Not like the mud covered, usually bleeding in some way, wailing banshee I was as a lad!

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 13:23
by Chopper
Woa Mama, that's a big scan you have. Looking at my APC its certain a Palitoy figure will only fit if I cut it in half and then fold it. I see what you mean by the pegs now, too, tho with the APC you don't really need them because the Joes leg articulation is sufficient. Bugger, back to square one for my driver. Hit and Run me thinks..... Another thing I noticed is that the seat is a little further back in the ATC, probably why the guts were re-designed in the first place. I'd love to see pics of a ATC all loaded with Z troops.

:chopper:

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 13:41
by SteveD
Chopper wrote: I'd love to see pics of a ATC all loaded with Z troops.

:chopper:
I will see what we can sort out - I was looking for an excuse to play tonight anyway! ;-)

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 15:47
by Double-Tap
chops i have a spare phones head knocking about.
PM me your address and i'll send it off.
Bill

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 21:59
by Sundance
chopper, if you're doing a Forward Air Controller, or more properly a Joint Tactical Air Controller, you really ought to consider getting a set of Duke's binoculars for him...

Re: Wanted - custom parts and some advice

Posted: 24 Mar 2009 23:24
by Chopper
Thanks guys, very much. I have the binoc's from Sneak peek for him Sundance. He's actually quite cool, a Phones head ought to set him right off. His codename will be "Radar" :-)

:chopper:

Re: Wanted - custom parts and some advice

Posted: 25 Mar 2009 00:43
by Double-Tap
Chopper wrote:Thanks guys, very much. I have the binoc's from Sneak peek for him Sundance. He's actually quite cool, a Phones head ought to set him right off. His codename will be "Radar" :-)

:chopper:
send me your address and i'll get a phones head sent off.
Bill