Blood for the Baron!

4 B E J & G also look to be Asterix. And I wouldn't be surprised if some other bits are too.

Pic 1
B & P are for Transformers: Hoist

Thanks guys - most helpful. I have a couple of Blackstar figures (including the one show) that were in the box, so the accessories match up.

3 F is Robo Force Blazers head.
Looking back they were just a Dalek rip off, poor guys.

good game, more more!

In fact the other 4G bits look to be tarnished ankle clips from the Playmo Space range.

I'm going for some ultra geek points with this little lot, now I've seen them on the big screen of my work PC (what else is a guy to do once post has gone and he's waiting for the office to close?? More work??? Why - that's just crazy talk!!)

Anyway:-
1V - A Team (large figure) binoculars without the neck wire. Zoom in on Murdock:-

1 U - is part of the rear flint assemblies off the series 2 Blackstar figures - they popped out (hence the spring) to hold the flint, then clipped back into place, leaving a little revolving wheel that lights up the flint in his chest, created by the spark (how geeky am I!!)

In this pic the part (1U) is missing, but that is where it would fit in to maintain pressure on the flint:-

:- I suspect 1T and 1P to be part of this too?

1 Q - I know. I really do! It's bugging me though!!! Possibly the wing off an Adventure 2000 item??? But I cant find a pic to confirm the hunch - only pic I can find of winged item is different

Or it could possibly be MASK....

Now, tons of Asterix to go with the rock etc.

3D is the belt from a Character, and goes with 4F (his cape - see scan of my leaflet I just dug out from my cabinets at work (dont ask!) - bottom piccie - looks like Obelix a bit -yellow belt and red cape)


Lots of parts in pic 4 are Asterix too - plates, shields and the like as you can see in the pic. I suspect some of the swords to be too, but it's hard to tell them from Playmobile Romans.

And, last, but not least (and this brought memories flooding back!) 2F (looks like a lolly stick) is the handle of a 'launcher' catapult you got with a toy plane.

It would have had elastic looped around the top (if you take a close up picture of the top of it I bet it has little cut outs the elastic would have looped around) and it came with a plane that was made of quite robust plastic with a cut out section under the nose cone that attached to the elastic catapult and launched it! Like a glider really. I had a blue one, my older brother a red one!

Stick should be quite flexible, as I remember they bent almost double before they snapped (or at least they did before 30 years of ageing!

There endeth my geeky input! Do i get a badge???